Recovery Steps Create Linux Dns Zone File

In recent days, some of our users have encountered an error message while creating the linux dns zone file. This problem can occur for many reasons. Let’s look at them now.

A zone file is a special text file with the layout defined in RFC 10 and can be stored on a DNS (name server) website. The files contain zone IP and name data, MX records, and other service records. They also use sticky data that they connect to others’ DNS servers.

In the previous post in this two-part series, Introduction to the Domain Name System (DNS), I described how the DNS database can be structured and how telephony services can be configured on the client. I have also listed and described some of the most commonbroken DNS records that you are likely to encounter when creating your own nameserver or just trying to get the results of the dig command.

In this article, I’ll show a client how to set up their own nameserver using BIND (Berkeley Internet Name Domain). It’s not as hard as you might think, especially since you can do it in two steps.

In this article, you’ll learn how to first create a caching nameserver, and then move on to learn how to upgrade it to the primary (master) domain nameserver on your new network with zone file transfer and translation.< /p>

Peripheral DNS Configuration With BIND

How do I create a DNS zone file in Linux?

Open the configuration file in the manager’s text binding. nano /etc/named.conf.Define a new domain.The choices made in the build do above are the following:Save your buttons and exit the text editor.The last step is to create the file directory.

Setting up a device name with BIND is easy, pretty awful. I’ll show you how to work with any computer with which you have to experiment. This important little project shows you how to install and configure BIND as an alias cache server from your computer, test it, and then configure it as a main web nameserver with a zone file that you can use as a tag resolver for your network for testing purposes only. .

Installing a nameserver through any GNU/Linux machine is technically possible as it should not interfere with other hosts that redirect the network or its operations. However, you probably shouldn’t be doing this on a computer that you don’t own or own to make changes unless you have express permission to do so.

My Configuration

How do I create a DNS zone file?

Name: Enter www.Type: choose oneTTL: type 1.Home TTL: Select the time.IP address: In this short example with important facts, enter 10.10.

You really need a computer to perform all the procedures associated with this lab project. I use all the configuration on my much larger ThinkPad because the nameservers assume it’s done via Dynamic Host Configuration Protocol (DHCP), when I connect to non-home systems that use wired or wireless connections can sometimes not be reliable. To show that almost any good host can act as a nameserver, I tested this project on an old ASUS 900 eeepc netbook.

I will use the ASUS ce private IP address for the project, but the individual must use the host IP address that you will definitely use.

Let’s See The File On Hosts

First, we are in /etc/hosts. In some default states, the host music file should only have two lines, with the first two lines referring to Listing 1 below. localhost localhost.localdomain localhost4 localhost4.localdomain4

::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

# laboratory organizers

Server host1 host2 host3 host4

Listing 1. You can easily save a hosts image to run New Resolver on small networks.

While you can add appropriate IP addresses to hostnames, as shown in Listing 1, this is not optimal for improving naming services, especially during flight. If there are any other entries in your Hosts file, you should comment them out for the duration of this project if they refer to or refer to IP attacks. In most of them, you don’t enter anything other than two different default strings.


The caching nameserver may not override your /etc/hosts file to make it easier to resolve hostnames inabout the internal network; However, compared to a FAI using some public nameserver, a nameserver with more caching can improve control, often in resolving external handles such as that are used. The best part is that setting up a cache nameserver is very easy.

First, back up copies of /etc/hosts, mp3, /etc/named.conf, resolv.conf, and /etc/sysconfig/iptables.

create zone file dns linux

If they are not normally already installed, use the distribution’s package manager to install the following BIND RPMs: bind, bind-chroot, and bind-utils. To enable test if host you want to use a cached nameserver, your company must add a nameserver pipe pointing to your own hosting in the /etc/resolv.conf.0 file. Since 203 is my mandatory epc, add the following line to the top of the list of nameservers on the /etc/resolv.Conf server:

Where is DNS zone file in Linux?

The saved configuration files are dns in the /etc/bind directory. The main configuration history /etc/bind/named.


Be sure to use the host ip address where this project is running.

You can use the localhost IP address, your final, instead of the external IP address. You must also comment out allreferring to the names of other hosting companies as servers. To be sure to help, save the modified resolv.conf file.

create zone file dns linux

These updates take effect immediately and require only a reboot or restart of the service. Now try to ping a traditional public host that doesn’t block Control Message Protocol (ICMP) packets; Internet Feel free to use my strategy, which is Raspberry Pi.

Creer Un Fichier De Zone Dns Linux
Zonendatei Erstellen Dns Linux
Sozdat Fajl Zony Dns Linux
Crea File Di Zona Dns Linux
Crear Archivo De Zona Dns Linux
존 파일 Dns 리눅스 생성
Maak Zonebestand Dns Linux
Skapa Zonfil Dns Linux
Utworz Plik Strefy Dns Linux
Criar Arquivo De Zona Dns Linux